Just like the title says. My cigars are kept at 65rh, but 2 times using the draw tool badly cracked the wrapper
Any suggestions?
Printable View
Just like the title says. My cigars are kept at 65rh, but 2 times using the draw tool badly cracked the wrapper
Any suggestions?
Are they connies or...
Yeah, the different wrappers tend to have different strengths and thicknesses, some are more likely to crack than others. What draw tool are you using? The ones that have a little barb I think are the best as you can push it in and it will pull out a little tobacco on it's way out, so you aren't wiggling it around, just straight in and out.
Yeah, its only been an issue with one brand of Coronas. I'm careful to only poke the tool around the middle. It's a straight tool with a point on the end, no barbs.
Out of curiosity, what Cigar?Quote:
Originally Posted by jrfoxx
Casa de Garcia Nicaragua CoronaQuote:
Originally Posted by jhedrick83
Sent from my SM-G930V using Tapatalk
Hey @jrfoxx
It would be nice if you introduced yourself.
Is it just this cigar that is cracking or that you have to use a draw tool?
i rarely have the need for a draw tool, like less than one out of every 30-40 cigars. Often it’s the same cigar line that gives me trouble indicating it’s a rolling issue. I wouldn’t expect that you would have to use the draw tool so frequently.
It hasn't been to often that I need the draw tool. Maybe 3 cigars per hundred
It only happens to a certain brand and I know that it is stored at 60 degrees and 65 percent rh, so they aren't dry
I just can't figure it out an I smoked plenty of tight draws without using the tool.
Sent from my SM-G930V using Tapatalk
No expert but sounds like a rolling issue. How are you cutting guillotine punch v cut? Have you tried a different cutter?
The “RH” stands for relative humidity, if your cigars are 65% at 60 degrees they’re probably over humidified and closer to 75% at 70degrees.Quote:
Originally Posted by jrfoxx
Wow, didn't know that
I'll try some 62% bovada packs and move them to a warmer area. Thanks man
Sent from my SM-G930V using Tapatalk
If you have an accurate hygrometer, then temperature is factored into the RH reading. That's the whole point of measuring things in relative humidity--it's measuring the humidity in relation to the temperature. So it doesn't matter if it's 40 degrees or 80 degrees, if you have an accurate hygrometer and it reads 65RH, that's what your cigars are being stored at.Quote:
Originally Posted by AlanS
You are correct that temperature fluctuations affect RH, but it's actually the other way around. Higher temps will drop the RH if nothing is done to correct it (i.e. adding water vapor). That's why two-way humidifiers like Bovedas are great. I keep all my cigars in the basement, so they're prone to seasonal temp changes. But I know that no matter the temperature, the bags will keep the RH at 65, as that's what they're designed to do no matter the temperature.
What's most important is to keep the temperature constant. It will take awhile for a Boveda or any other humidifying device to correct the RH when temp swings happen.
https://climate.ncsu.edu/edu/HumidityQuote:
If the water vapor content stays the same and the temperature drops, the relative humidity increases. If the water vapor content stays the same and the temperature rises, the relative humidity decreases. This is because colder air doesn’t require as much moisture to become saturated as warmer air.