How thick do you let it build?
Printable View
How thick do you let it build?
I try to keep mine to the thickness of a dime.
Until I can't fit any more tobacco in the bowl.
http://i602.photobucket.com/albums/t...ick%20Cake.jpg
KIDDING. Pretty much the same as Warren, dime, or perhaps nickel thickness & I start scraping it down.
Whoa that's nasty.
Thanks for the replies. I'm in the process of breaking in my first briar and it seems like the cake comes off really easily, should I not clean the inside of the bowl at all until there is a nice layer?
I don't wipe out the bowl after each use. Usually after 2 or 3 and only if its awful. I do use a pipe cleaner after each use though. I also give my briar a good shake with the ash that's left and let that sit. As soon as I began this process cake began to form.
An hour after smoking, I usually swab it out with a pipe cleaner. Try to be patient with the process and it will build up.
I'm a dry reamer. I wipe out the inside of my bowl after each smoke, whether I am building cake or not.
I am not a big cake fan, I like to keep mine minimal and I hate reaming with my knife...probably because of all the estates I get like the one @commonsenseman posted (OK, they aren't quite that bad).
So you don't let any cake build up? Is that at all detrimental to the life of the pipe?Quote:
Originally Posted by Branzig
Cake builds, just slowly. No damage to the pipe by dry reaming, just smoke slow and keep it cool.Quote:
Originally Posted by Jonas
If it is a brand new pipe, I might smoke 3ish bowls without dry reaming it. But after that, I dry ream after every smoke regardless.
it's preference, but I'd say it's time to ream if it's thicker than a dime all around. I also don't try to"help" my pipe build cake, it builds itself in time. After each bowl, regardless of whether I'm breaking in or not, I put a palm over the bowl and shake up the ash to evenly coat the bowl and then wipe it out with a pipe cleaner once it's cool. This gives you an even cake build up and a dense cake to boot. Not cleaning out your pipe every time and trying to build a cake fast will give you a softer cake that is lumpy and uneven....in my experience.
I have used this method forever and don't ever need excessive or frequent reaming and all my pipes smoke nice and dry, even the ones that used to smoke a bit wet now smoke dry with a good cake. Let it happen naturally.
I gently swab out the ash with a pipe cleaner after each bowl. In my experience, using ash, honey, etc. to build cake leads to weak crumbly cake. And there's nothing you can do (short of giving up smoking) to stop cake from building. As I've said elsewhere, I look at cake the way I look at shaving. At first, it was really exciting and I couldn't wait for more whiskers to show up. But eventually, realized I was going to be scraping this shit off of my face for the rest of my life, and all romanticism disappeared. Same with cake; when you're first starting, it's a big concern. Eventually, it'll just be another chore (though still more enjoyable than shaving, if you ask me!)
I mostly smoke cobs, so I don't let any cake build up.
Another misleading pipe thread. I was sooooo excited for dessert!
When I can't get the big wooden tamper into the chamber with a medium pipe or the small wooden tamper into a Legend-sized cob.
I do the same thing. The cake on my pipe is probably about half the thickness of a dime. Just a uniform even coat so there is no raw briar.Quote:
Originally Posted by Branzig
It's really the preference of the smoker.
If your "thinking" about cake build up your just wasting time thinking.
If it happens it happens.Let it be.