Wineador build

[Ilroy]

Wondering how much you left on the sides and back for air movement. I probably have 1/4" - 1/2" on sides and back

If using 1/4 for bottoms as suggested above, would you still be able to use the same construction method? You could use very similar construction. I was thinking if I did it again, I'd just have the bottom slats hang past the sides to use as the part that fits in the cooler slots. You could do the sides/fronts/backs the same as Kyle and then either glue the bottoms to the box, or nail it with brads. I used brads to join all mine together on my build, and would probably do the same if I did it again.

I'm considering doing 1/4 bottoms and 3/8 sides - was gonna go 2 inches like you said, because the wood comes in 4in widths, so good usage. But after checking, my large drawer-style humi is 2in high for the drawers, and honestly I only get them 2 high. 3 cigars would make it real tight between drawers clearance-wise and I don't want my cigars scraping on wood every time I pull a drawer, so I'm debating going 2 3/4 for height, hoping that gives me safe room for 3 gars high. 3 inches is too high for my drawers to fit in the wineador nicelly, also, have to add that 1/4 piece the walls sit on, right? It's these things that always end up messing me up with building projects...

Measure out exactly how much room you'd have for height of drawer sides and go with that. I am just guestimating 3" for what I'd do with a new build, but it might be slightly less than 3"...?